Shop

PN 40 Full Bore Natural Gas Valve is a kind of valve that closes or opens various passageways. In this way, the gas in the system is controlled. Thanks to the product, the pressure or flow in the flow direction can be regulated. They can be used in many areas, especially in power generation, mining, water and wastewater treatment facilities.

PN 40 full-pass natural gas valves, which draw attention as one of the most important parts of natural gas systems, are preferred for opening and closing purposes. These types of natural gas valves, which are also used in gas connection facilities, enable easy installation. In this way, it makes a comfortable use possible.

What is a PN 40 Full Bore Natural Gas Valve and What Does It Do?

The PN40 Full Bore Natural Gas Valve, which is used in natural gas systems with its features, opens or closes the passageways in the system. In this way, it allows the gas to be regulated in the system. It is possible to state that the product is frequently used in gas connection facilities, as it enables dominance over gas.

They are designed according to EN 331-TS 9809 standards. In addition, it is put into use after passing the EN 12266-1 tests. The main task of such valves is to cut off the gas in the system or to ensure the flow of the gas flow within a certain system. Easily opened valves can also be closed easily. In this way, it is known that they enable a comfortable use.

What is PN 40 Full Bore Natural Gas Valve?

PN 40 Full Bore Natural Gas Valve, which is included in a certain natural gas system, has various features. These features can be listed as follows:

• Valve is easily opened and closed.
• A sphere with a hole the same size as the flow section is at the center of the system. Teflon makes a quarter turn between the bearings through the shaft. This rotation corresponds to a 90 degree angle.
• It can be used in both directions.
• Teflon material in the system is resistant to high temperatures.
• It has a very wide application area.
• Even in the fully open position, there is no reduction in the flow section. In this way, the pressure loss is reduced to zero.

What does PN 40 Full Bore Natural Gas Valve Do?

PN 40 Full Bore Natural Gas Valve is included in natural gas systems. It makes it possible to cut off the gas or continue its flow. Each part in the system moves according to the working principle of the valve. Valves, which enable the pressure or flow to be regulated in the flow direction, are often preferred because they can also work with advanced automation systems.

Industrial wet epoxy is used in its production. It is possible to state that it has a very systematic structure since it can also work with lower torque values. Since the teflon beds in the system are reinforced with stainless steel plate springs, they can work with 100% sealing value.

Where is PN 40 Full Bore Natural Gas Valve Used?

Very simple to install, is a product used in many areas. The valve, which is preferred in natural gas systems, can be used open or closed. When the system is open, gas flow is provided, and when the system is closed, gas flow is interrupted. Opening and closing operations can be done in a practical way.

The areas where PN 40 full bore natural gas valves are used are as follows:

• Energy production
• Water and wastewater treatment
• Oil and gas processing
• Chemical and plastic production
• Food production

The product preferred in this and similar places is gazmer approved. The advanced and technological features of the product make it one of the most important parts of the natural gas system.

PRODUCTION STANDARDS

PN 40 Full Bore Natural Gas Valve

• DN15 – DN150
• PN 16-25-40
• Design EN 331 – TS 9809
• Connection EN 1092-2 / ISO 7005-2
• Face to Face DN15-DN125: EN 558 Series 1 / DIN3202 F1
• DN150: EN 558 Series 28 / DIN3202 F7
• Marking EN 19
• Tests EN 12266-1
• Paint Industrial Age Epoxy

FEATURES

• FAF1400, PN 16-25-40 flanged ball valve is operated by a sphere with a hole of the same size as the flow section, with the help of the spindle, a quarter turn (90 degrees), between teflon bearings, the ball rotates parallel to or perpendicular to the flow axis.
• It can be used bidirectionally.
• Thanks to the stainless steel plate spring reinforced Teflon (PTFE) bearings, 100% impermeability is provided at the lowest and highest pressure values.
• It can be mounted directly on the pump without the need for additional spacers.
• The compatibility of Teflon material in various fluids and its resistance to higher temperatures allow it to be used in a wide range of applications.
• It is suitable for use in fully open or fully closed position.
• In the fully open position, the pressure loss is almost zero, as there is no reduction in the flow section.
• It can be operated with lower torque values.
• It is a Gazmer approved product.