Qatar fire pump manufacturers produce effectively for the aftermath, as well as the precautions to be taken for fires. Fires are one of the negative situations that all living things have difficulty in dealing with. Because it can be difficult to predict the severity and course of fires that occur due to various reasons. Because types of fires occur differently, it may be necessary to use different fire systems to deal with them.
It is important that the fire pump is maintained and ready at all times. The most important thing to do in this direction is to perform periodic maintenance. Fire pumps work with a controlled control panel. For this reason, all kinds of malfunctions should be taken care of in order not to disrupt the system. There are many types of fire pumps. We can specify the types of fire pumps as follows:
What Are The Qatar Fire Pump Manufacturers?
They are centrifugal pumps that are produced as a single stage and have a volute body with an end body. The pump performance is in accordance with the NFBA standard. Qatar fire pump manufacturers produce all kinds of fire pumps. Although pump maintenance is quite easy, maintenance operations are not difficult. Therefore, during maintenance, the shaft, impeller and other rotating tools can be removed from the pump installation without being disassembled.
What Pump Types Do Qatar Fire Pump Manufacturers Produce?
They are single-stage double-suction pumps with radial impeller and separable body. With the back-to-back design of the radial impeller and the closed impeller, it is possible to weaken the axial load. Inlet and outlet flanges are also located on the same axis. Shaft sealing is ensured by soft packings. Double suction pumps have the advantage of low NPSH character. Electric motors and pumps are provided with flexible couplings on the standard chassis. The impeller of the pump is made of bronze and the shaft is made of stainless steel.
Line Type Fire Pumps
They are centrifugal pumps with vertical shaft, single stage and line type volute body. Closed impeller structure, single suction and balanced by wear rings. It is dynamically balanced and the motor and pump connection is made with an adapter. Essential part interchangeability is adopted in the design. By accelerating the supply of spare parts, it can operate with low electric motor power. In accordance with the NFBA fire standard, shaft sealing is provided with soft packings. Pump types with different features are provided by Qatar fire pump manufacturers.
What is the Working Principle of the Fire Pump?
The structure and working system of fire pumps are the same as centrifugal pumps used in the general water system. However, fire pumps that need to work immediately for emergencies have more details than others. According to the situation and area of the work to be done, it should work with a net output focus. While others are produced according to more economical and efficient works, the fire pump should give a clearer and more precise solution. They are centrifugal pumps that are more used in fire systems and are immediately solution-oriented.
It is the only pump type used in terms of being suitable for working conditions and hydraulic values. Fire pumps are in rotational motion on the shaft axis with the motor drive of the impellers or the impeller. With the centrifugal force it brings to the water, it gives pressure to the water in the form of the snail body. The water pressurized in the pump follows the snail body form. Therefore, the snail is transferred to the installation from the body outlet mouth.
These are the machines in basic hydraulic structure that provide the transfer of the water, which it has gained pressure, to the required areas. In this way, it ensures the most functional and regular operation. Progressively, Qatar fire pump manufacturers pay attention to this situation. Govalf brand fire pumps are designed considering all these systemic conditions.