Shop

PN 16 Full Bore Ball Valve (2 Pieces)

PN 16 Full Bore Ball Valve is a two piece and full bore valve type. High performance ball valve is preferred in many fields. It is used in hot and cold water systems as well as in compressed air systems. The working principle of the full-pass valve is quite simple. Working with a sphere with a hole the same size as the flow section, it makes a 90 degree turn possible.

The ball valve, which can be used in two directions, has a structure that can be used in fully open or fully closed position. The valve, which can be operated with a lower torque value, has a 2-piece system. There is a hole at the end of the shaft in the system. A ball standing balanced between two seals makes a quarter turn or 90 degree turn on the fluid passage hole axis.

What is a PN 16 Full Bore Ball Valve (2 Pieces) and What Does It Do?

Evaluated among ball valves, PN 16 Full Bore Ball Valve has a full bore system. Ball valves produced according to TS 3148 / DIN 3357 standards have passed TS EN 12266-1 tests. It controls the liquid or gas flow and makes long-lasting use possible.

PN 16 full-bore ball valves have many features and the features that ensure the correct operation of the system are as follows:

• It has a hole of the same size as the flow section and works within the system to control the flow of liquid or gas. The sphere makes a 90 degree turn or quarter turn between the vertical or parallel Teflon bearings.
• Teflon bearings are reinforced with stainless steel plate springs.
• It provides maximum sealing even at the lowest and highest pressure values.
• It can be used by being mounted on the pump quickly and easily without the need for an additional part.
• There is no pressure loss in the system even when it is in the fully open position.
• It is designed to be used in fully open or closed situations.

What is PN 16 Full Bore Ball Valve (2 Pieces)?

Preferred in many areas, allows the gas or liquid in the system to be controlled. Since they can be used in two directions, they have a wide usage area. Teflon material is compatible in various fluids. Thanks to this, it can withstand even high temperatures.

What Does PN 16 Do?

The main purpose of the PN 16 Full Bore Ball Valve is to control the gas or liquid in the system through a certain mechanism. It can be used fully open or fully closed. In addition to being used with lower torque values, the product is also very easy to install. It is also possible to state that it has a 100% tightness value.

Where is PN 16 Used?

PN 16 Full Bore Ball Valve, which is a 2-piece product, can be used in many areas. These areas;

• Facility setup,
• Pipelines,
• Fluids without acid or alkaline value,
• Low pressure steam,
• Hot water,
• The industry sector,
• Tanks,
• Power plants,

The product, which can operate at temperatures up to +200 degrees, incorporates innovative features. It can be used at an angle of 90 degrees, it has an advantageous use. It is possible to state that it is quite simple to use because it is installed in a practical way. It has an effective use in irrigation systems as well as in installation and industrial areas. Industrial wet epoxy is used as paint in the product.

Wide usage area for use in industrial, plumbing and irrigation systems.

PRODUCTION STANDARDS

• DN15 – DN250
• PN 16
• Design TS 3148 / DIN3357
• Connection EN 1092-2 / ISO 7005-2
• Face to Face DN15-DN150: EN558 Series 14 / DIN 3202 F4
• DN200-DN250: EN558 Series 27 / DIN 3202 F5
• Marking TS EN 19
• Tests TS EN 12266-1
• Paint Industrial Age Epoxy

FEATURES

• The flanged ball valve PN 16 operates with a sphere with a bore the same size as the flow section, the sphere rotates a quarter turn (90 degrees) between teflon seats which should be parallel or vertical.
• It can be used bidirectionally.
• Thanks to the stainless steel plate spring reinforced Teflon (PTFE) bearings, 100% impermeability is provided at the lowest and highest pressure values.
• It can be mounted directly on the pump without the need for additional spacers.
• The compatibility of Teflon material in various fluids and its resistance to higher temperatures allow it to be used in a wide range of applications.
• It is suitable for use in the fully open or fully closed position.
• In the fully open position, the pressure loss is almost zero, as there is no reduction in the flow section.
• Can be operated with lower torque values

SCOPE OF APPLICATION

• hot and cold water
• hot water
• low pressure steam
• power plants
• Fluids without acid or alkaline properties.
• Facility setup.
• pipelines
• tanks
• Industry
• HEAT
• +200 °C