Rubber Compensators; Rubber expansion joints are fasteners that are resistant to pressure of 16 bar and temperature of 110 degrees and can be mounted directly to the installation pipes by clamping method. The most basic task of rubber expansion joints is to protect the installation against heavy impacts and deformations that may come from the outside and to prevent structural problems caused by temperature. At the same time, another function of rubber compensators is to control axial or lateral movements. In addition, it is possible to use rubber or rubber compensators to control problems such as expansion and contraction caused by temperature changes in the installation.
Mostly used in pipe installations to protect the components of the installation. In addition, it can be used to protect spring parts, mechanical parts or joints. Therefore, compensators made of rubber material have a significant protective quality and have a wide use.
Another important feature of rubber compensators is that they provide sound insulation. These compensators, which isolate the sounds generated in the installations very well, are also protective against the effects of vibration. While preventing the installation from being deformed due to vibrations, it also provides protection against possible external impacts. Tire and rubber compensators have a complicated structural content.
Rubber expansion joints have been developed to eliminate problems such as elongation and shortening, which are produced from synthetic rubber and caused by temperature changes in the installation. Rubber compensators, which do not require the use of any gasket or shaft seal, can be easily mounted. Thanks to its rotating flanged structure, it is possible to complete assembly processes quickly and easily.
In general terms, rubber compensators are connection parts that undertake the task of absorbing lateral, angular and axial movements. This type of compensators have different movement capabilities according to their diameter properties. As the diameter of the compensator increases, there is no change in its angular mobility and millimetric differences occur in the lateral movement.
Prevent problems such as elongation or shortening caused by external impacts or temperature changes. They play a very important role in installations with these functions, are manufactured using a special type of rubber with steel wire and nylon core carcass.
The body of them is completely made of rubber. The fact that the body is rubber plays an important role in eliminating sound problems and preventing possible noises that may be caused by the use of compensators. It also has the effect of preventing the occurrence of conditions such as elongation and shortening in the installation. Their joints also have the function of protecting the installations against the effect of vibration.
They include a wide range of uses due to their properties. Especially in hot and cold lines, it is widely preferred to eliminate possible problems caused by heat exchange. Another common usage area of this type of compensators is in all types of pump systems including pipelines.
At the same time, the most important function of rubber expansion joints, which are widely used in industrial facilities, in such facilities is to reduce the effect of vibration. Again, this type of compensators are preferred in some industrial facilities where the heat balance is not maintained. It is possible to produce rubber compensators in different sizes and diameters. It is suitable for production in the range of 50 to 2000 mm diameter and 50 to 1000 mm length in line with the demands. Therefore, it offers a wide range of solutions for almost all kinds of demands.
16 bar pressure and 110oC temperature
The rubber body consists of special synthetic rubber with steel wire and nylon cord carcass.
It is a good solution to vibration, sound and dilatation problems.
It can absorb axial, lateral, angular and transverse movements.
It provides ease of assembly with its rotating flanged structure.
No gasket or packing required.
