Automatic air relief cock is the equipment that allows the air in the heating and ventilation systems to be discharged from the system. Since the air in the system is automatically removed from the system, unwanted noise or cavitation in the pump is prevented. In addition, thermal imbalances that may occur in heating units are eliminated.
In closed circuit systems, air can remain in the system for various reasons, which prevents the system from operating effectively. Therefore, it is very important to remove the air in the system. The automatic air relief cock in the brass valve category ensure that the air in the system is removed and the existing problems are eliminated. Therefore, it is possible to state that the usage areas of automatic air relief cocks are quite wide.
What is Automatic Air Relief Cock, What Does It Do?
It is a product used in heating systems as well as automatic air relief cock systems made of hot forged brass. The working principle of the product, which automatically evacuates the air in the system, is quite simple. Float and lever arm are needed in the venting process.
Both parts enable the system to work effectively to remove air. The air relief cock acts on the float with the air accumulated in its body. This triggers the float downwards. After each step, the air mouth opens.
With the evacuation of the air, the fluid in the system starts to move upwards by filling the air vent body. Then the air vent is closed. Each of the mentioned steps ensures that the air in the system is effectively removed from the system.
It is observed that some air may remain in the system in case of water shortage in a closed-circuit installation or during the filling of the heating installation. Since this situation prevents the system from working properly, the air in the installation must be exhausted effectively.
Automatically working air relief cock are activated in case of air in the system and provide downward movement of the float. After this step, the air discharge channels are angled and the air in the system is taken out of the system without any problems. After the air evacuation is completed, the air evacuation channels are closed.
What Does Automatic Air Relief Cock Do?
It is used as an automatic air relief cock, used in closed circuit systems with its innovative features. It is very important that they are always at the top of the system in which they are used. The product, which works automatically, supports the transfer of air in the system that causes problems in the system.
They are produced effectively and have sealing feature, have a wide usage area. The product is generally known to provide support on the following issues:
Where is Automatic Air Relief Cock Used?
The automatic air relief cock, which provides the evacuation of the air in the system, is an equipment used in many areas. Thanks to its basic working principle, it prevents airborne problems in the system. General areas of use;
It is recommended to put air under the automatic air relief cock used in this and similar areas. In this way, it becomes possible to collect the air faster and to expel it in series. It is known that automatic air vents, which can be used in industrial areas, are also frequently preferred in residences. It is possible to state that the product attracts attention with its innovative features and technological infrastructure.
