Brass Spring Check Valve can be defined as the armatures that prevent the fluid in the system from returning back. It is a kind of safety element and such products are needed in many areas. The product, which is produced in a very special way, provides 100% sealing. Due to the needs of the system and its intended use, it has to meet various criteria.
Although its working principle is quite simple, it basically acts by spring force. The decrease in pressure in the system ensures that the spring force is closed. The product, which can be used in both horizontal and vertical positions, is used in many sectors with its innovative features. It has a wide range of uses, especially in hot and cold water applications, compressed air installations.
What is a Brass Spring Check Valve and What Does It Do?
Brass spring check valve is a kind of safety equipment that acts with a spring mechanism and provides unidirectional movement of liquid or gas in the system. It is also observed that it is used instead of complicated fixtures, since its operational safety is quite high. The working principle of check valves is quite simple.
The disc in the product can move in one direction on the hinge pin in one direction. As the fluid moves in one direction, the disc opens and passes. In case of reverse flow, the disc is closed and the movement of the fluid is stopped. This allows the formation of one-way fluid movement within the system, making it possible for the system to operate smoothly.
Brass spring check valve, which is needed in different areas, especially in industrial areas, pumps, home use, has a system that enables long-term use. Reverse flows occurring in a system can cause damage to materials such as pumps and valves in the system. This prevents the system from working effectively.
Spring check valves have a single inlet and outlet and there is a mechanism that allows the fluids to move in one direction. The main factor that makes the check valves work is the pressure difference. If the pressure in the inlet part of the valve is higher than in the outlet direction, the valve opens. Otherwise, the valve closes. In this way, the liquid or gas in the system moves in one direction and the integrity of the system is ensured.
The brass spring check valve, which prevents the fluids passing through the installation from returning by going through a certain direction, has the features that can be listed as follows:
Each of the specified features makes it possible to use such check valves in many areas. Since it is manufactured in a special way, it ensures the safety of the parts in the installation.
The usage areas of the brass spring check valve, which has a spring mechanism and moves with this mechanism, are quite high. It is possible to list the usage areas of such products in general under the following headings:
In each of the specified areas, check valves with a spring mechanism are preferred. It is possible to state that such products attract attention thanks to their easy installation and comfortable use features.,
NORMES DE FABRICATION
DN15 → DN80
Filetage de raccordement EN ISO 228-1
Essais EN 12266-1
Marquage EN 19
Le volet conique en plastique ABS placé verticalement dans le sens de l’écoulement sur la surface d’étanchéité traitée sur le corps assure une étanchéité à 100 %.
Lorsque l’écoulement commence, le disque est retiré et autorisé à s’écouler entre le corps et le disque déterminé dans le système.
Il peut être utilisé en position horizontale et verticale.
Produits en laiton de marque FAF fabriqués à partir de laiton MS58. Il a une grande durabilité et une résistance aux chocs à basse température.
Stock pour une livraison rapide.
Grâce au volet conique, aucun cognement ne se produit et il fonctionne en silence.
Il n’y a pas de problème de rupture de clapet dans d’autres types de clapets anti-retour.
La pression de service est de 16 bar entre DN 15 – 50, 10 bar pour DN 65-80
eau chaude et froide
Applications résidentielles et industrielles
Installations d’air comprimé
-10, +90 °C